ENES G6 FIRMWARE ANDROID 5.0 CHINESE FLASH FILE

 Connected to Phone.
CPU: MT6575 SW: E201 Ver: CB00
Downloading Boot8 …
Nand Flash Type: Nand_NEW_006E
Nand Flash Code: 002C00BC(00900055)
Nand Flash Size: 0x20000000 Hex Bytes
INT/EXT RAM  Size: 0xC4800+0x0
Reading Size: 0x21000000
Reading infr(Nand)…
PRELOADER  BaseAddr:0x0  Size:0x40000
DSP_BL  BaseAddr:0x40000  Size:0xC0000
__NODL_NVRAM  BaseAddr:0x100000  Size:0x300000
__NODL_SECCFG  BaseAddr:0x400000  Size:0x20000
UBOOT  BaseAddr:0x420000  Size:0x60000
BOOTIMG  BaseAddr:0x480000  Size:0x500000
RECOVERY  BaseAddr:0x980000  Size:0x500000
SEC_RO  BaseAddr:0xE80000  Size:0x120000
__NODL_MISC  BaseAddr:0xFA0000  Size:0x60000
LOGO  BaseAddr:0x1000000  Size:0x300000
__NODL_EXPDB  BaseAddr:0x1300000  Size:0xA0000
__NODL_FAT  BaseAddr:0x13A0000  Size:0x1E00000
ANDROID  BaseAddr:0x31A0000  Size:0x10E00000
__NODL_CACHE  BaseAddr:0x13FA0000  Size:0x1E00000
USRDATA  BaseAddr:0x15DA0000  Size:0x9820000
__NODL_BMTPOOL  BaseAddr:0xFFFF0050  Size:0x0
Done.

BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0xE201
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.3.2 on BBID : 0x84
Initialize Memory … 
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0091 , [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0055 0056 0000 0000
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01
DEV RID    : 0x204D773D8E4BE6F882ECC4E80F9EFC7A
INT RAM    : 0x00020000
EXT RAM    : 0x10000000 [256 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


[AP] : Initial info read Ok!

ENES G6 mt6575 menu